Meier Custom Woodwork

After sanding and dry fitting chest, when for it and glued up chest and did some final sanding.

19Feb

Blanket Chest

Finished all the pins and tails, dry fitting the chest and do some tweaking. Now to get sanding then I can glue up assembly.

14Feb

Blanket Chest

Started working on the tails, came up with at trick to help hold the side piece so I could trace the pins on the…

13Feb

Blanket Chest

Dovetailing the corners for this cherry blanket chest. Hopefully going to look awesome.

06Feb

Coffee Table w/ Lift Top

Put a nice coat of clear gloss urethane allow it to dry did a buff of surfaces and applied another coat. After drying assembled…

05Feb

Sharpening Chisels

Took some time to bring out Work Sharp 3000 and put a good clean sharpen edge to the chisels.

04Feb

Dust Collector

Xmas brought me awesome dust collector, so old with the old. Got it mounted on the wall. Started installing the duct work, there is…

30Jan

Sanding Station

while figuring out a project detail took time to make improvements to sanding station. I started by cutting down the stand removing 6″, and…

29Jan

Radial Arm Saw