Well the cabinet is completely stripped, puttied and sanded, so we’re ready to wipe down and prime the cabinet.
24Oct
Read More
- Meier Custom Woodwork
- theshop@meiercustomwoodwork.com
15Oct
Read More
Put the back on the and installed it on the wall. Looks good and starting to fill it up.
11Oct
Read More
Cleanup corner splines and sanded everything smooth. Started coats of tung oil. Going to look nice
10Oct
Read More
We needed a jig to use corner splines on our tray so we came up with jig which allows to cut those spline groves….
10Oct
Read More
Got a chance to stain the shelf, first I used a pre stain to have a more uniform staining, then finished with maple stain…
04Oct
Read More
Bottom panel cut to size and rabbet cut to 1/4″ so fitted everything up and it looks nice, so will break it down sand…
02Oct
Read More
Plane some cherry down to 9/16 for the sides and end. Then cut them to proper width 1 1/2 and 2 1/4. Followed up…
29Sep
Read More
Did some quick 80 grit sanding want to look at what the pattern will look like a so did a neat trick took a…
29Sep
Read More
Able to get back on Black Hole, did some sanding starting with 80 grit then used some wood putty to fill in imperfection, will…
28Sep
Read More
I started building a Cherry Serving Tray. I size my bottom pieces to 3/8″ thick, I also try to mirror the center sections of…