Tray – Meier Custom Woodwork

11Oct

Cleanup corner splines and sanded everything smooth. Started coats of tung oil. Going to look nice

10Oct

We needed a jig to use corner splines on our tray so we came up with jig which allows to cut those spline groves….

04Oct

Bottom panel cut to size and rabbet cut to 1/4″ so fitted everything up and it looks nice, so will break it down sand…

02Oct

Plane some cherry down to 9/16 for the sides and end. Then cut them to proper width 1 1/2 and 2 1/4. Followed up…

29Sep

Did some quick 80 grit sanding want to look at what the pattern will look like a so did a neat trick took a…

28Sep

I started building a Cherry Serving Tray. I size my bottom pieces to 3/8″ thick, I also try to mirror the center sections of…

Tag : Tray